COATED ABRASIVES SELECTION:
Select the sort criteria shown below respecting the order, and than click on „Display” . The available coated abrasives products will be displayed on the right side. Use this menu to reach directly the product you wish.

COATED ABRASIVES

INSTRUCTIONS:

Brief presentation:

• Wide belts - width lager than 300 mm. The most usual dimensions of coated abrasives- wide belts are showed in the Catalogue of products.
• Narrow belts - width smaller or equal 300mm The most usual dimensions of coated abrasives- narrow belts are showed in the Catalogue of products.
• Rolls. The most usual dimensions of coated abrasives- rolls are showed in the Catalogue of products.
• Sheets
• Discs. The most usual dimensions of coated abrasives- wide belts are showed in the Catalogue of products.
• Flap wheels

	1. WIDE BELTS:
product code >>>

wood calibration   Coated abrasives-wide belts - used for wood calibration operations : -Coated abrasives-paper backing wide belts -used for wood calibration (all forest species) -type HEn 427E -coated abrasives paper backing- for wood calibration (resinous or soft) - type HEn 427ER -coated abrasives cloth backing-for wood calibration (all forest species) - type PEs 861X -coated abrasives cloth backing - for plywood and wood calibration (all forest species ) - type PCn 512X -coted abrasives cloth backing -for wood calibration (all forest species) , plywood calibration, plate made of wood chips and wood fiber calibration - type PEz 522X wood grinding   coated abrasives wide belts - used for wood grinding operations: coated abrasives paper backing wide belts -used for wood grinding (all forest species) - type HEn 427E coated abrasives paper backing wide belts- used for wood grinding (resinous or soft) - type HEn 427ER coated abrasives cloth backing wide belts- used for wood grinding (all forest species)- type PEs 861X coated abrasives cloth backing wide belts- used for wood and plywood grinding (all forest species)- type PCn 512X coated abrasives cloth backing wide belts- used for wood grinding (all forest species), plywood grinding, plate made of wood chips and wood fiber grinding -type PEz 522X wood finishing   Coated abrasives wide belts -used for wood finishing operations: coated abrasives cloth backing - for wood finishing (all forest species) - type PEs 861K putty, ground coat, varnish, paints grinding   Coated abrasives wide belts - used for putty, ground coat, varnish, paints grinding operations: coated abrasives paper backing wide belts- used for thin coating wood grinding- type HEn 427E coated abrasives paper backing wide belts- used for thin coating wood grinding- type HEn 425E coated abrasives paper backing wide belts- used for thin coating wood grinding- type HCn 805C putty, ground coat, varnish, paint finishing   Coated abrasives wide belts- used for putty, ground coat, varnish, paint finishing operations: -coated abrasives paper backing wide belts- used for thin coating wood finishing - type HEn 427E -coated abrasives paper backing wide belts- used for thin coating wood finishing- type HEn 425E -coated abrasives paper backing wide belts- used for thin coating wood finishing- type HCn 805C leather grinding   Coated abrasives wide belts- used for leather grinding operations: coated abrasives paper backing- used for leather grinding - type HEn 427E leather finishing   Coated abrasives wide belts- used for leather finishing operations: -coated abrasives paper backing- used for leather finishing- type HEn 427E

	2. NARROW BELTS:
product code >>>

wood calibration   Coated abrasives narrow belts -used for wood calibration operations: -coated abrasives paper backing narrow belts- used for wood calibration (all forest species)- type HEn 425E -coated abrasives paper backing narrow belts- used for wood calibration ( resinous or soft)- type HEn 425ER -coated abrasives paper backing narrow belts- used for wood calibration (all forest spcies)- type HEn 427E -coated abrasives paper backing narrow belts- used for wood calibration (rasinous or soft)- type HEn 427ER -coted abrasives cloth backing narrow belts- used for wood calibration (all forest species)- type PEs 861X -coated abrasives cloth backing narrow belts- used for wood and plywood calibration (all forest species)- type PCn 512X wood grinding   Coated abrasives narrow belts- used for wood grinding operations: -coated abrasives paper backing narrow belts- used for wood grinding (all forest species)- type HEn 425E -coated abrasives paper backing narrow belts- used for wood grinding (resinous or softy)- type HEn 425ER -coated abrasives paper backing narrow belts- used for wood grinding (all forest species)- type HEn 427E -coated abrasives paper backing narrow belts- used for wood grinding (resinous or soft)- type HEn 427ER -coated abrasives cloth backing narrow belts- used for wood grinding (complex shape of pieces)- type PEs 861J -coated abrasives cloth backing narrow belts- used for wood grinding (plane or curved shape of pieces)- type PEs 861K -coated abrasives cloth backing narrow belts- used for wood grinding (all forest species)- type PEs 861X -coated abrasives cloth backing narrow belts- used for wood and plywood grinding (all forest species)- type PCn 512X wood finishing   Coated abrasives narrow belts- used for finishing oprations -coated abrasives paper backing narrow belts- used for wood finishing (all forest species)- type HEn 425E -coated abrasives paper backing narrow belts- used for wood finishing (resinous or soft)- type HEn 425ER -coated abrasives paper backing narrtow belts- used for wood finishing (all forest species)- type HEn 427E -coated abrasives paper backing narow belts- used for wood finishing (resinous or soft)- type HEn 427ER -coated abrasives cloth backing narrow belts- used for wood finishing (complex shape of pieces)- type PEs 861J -coated abrasives cloth backing narrow belts- used for wood finishing (all forest species)- type PEs 861X metal deburring   Coated abrasives narrow belts- used for metal deburring: -coated abrasives cloth backing narrow belts- used for steel and stainless steel deburring- type PEz 522X -coated abrasives cloth backing narrow belts- used for steel, cast iron and casting brass deburring- type PE 522X -coated abrasives cloth backing narrow belts- used for metal deburring ( metals in general)- type PE 433X polishing operations   Coated abrsasives narrow belts- used for metal polishing operations: -coated abrasives cloth backing narrow belts- used for stainelss steel and steel polishing- type PEz 522X -coated abrasives cloth backing narrow belsts- used for steel, cast iron, casting brass polishing- type PE 522X -coated abrasives cloth backing narrow belts- used for metal polishing (metals in general)- type PE 433X -coated abrasives cloth backing narrow belts- used for non-ferrous metal polishinge- type PCn 512X metal grinding   Coated abrasives narrow belts- used for operations: -coated abrasives cloth backing narrow belts- used for ferrous and non-ferrous metal grinding- type PE 432X -coated abrasives cloth backing narrow belts- used for non-ferrous metal grinding- type PCn 512X metal finishing   coated abrasives narrow belts- used for metal finishing operations: -coated abrasives cloth backing narrow belts- used for ferrous and non-ferrous metal finishing- type PE 432X putty, ground coat, varnish, paint finishing   Coated abrasives narrow belts- used for putty, ground coat, varnish, paint finishing operations: -coated abrasives paper backing narrow belts- used for thin coat wood finishing- type HEn 425E -coated abrasives paper backing narrow belts- used for thin coat wood finishing- type HEn 427E -coated abrasives paper backing narrow belts- used for thin coat wood finishing- tip HCn 805C -coated abrasives cloth backing narrow belts- used for thin coat wood finishing (plane or curved pieces)- type PEs 861J -coated abrasives cloth backing narrow belts- used for putty, ground coat, varnish, paint finishing- type PE 432X -coated abrasives cloth backing narrow belts- used for putty, paint finishing (wet medium)- type PCn 622X putty, ground coat, varnish, paint grinding   Coated abrasives narrow belts- used for putty, ground coat, varnish, paint grinding operations: -coated abrasives cloth backing narrow belts- used for putty, ground coat grinding ( plane or curved pieces)- type PEs 861K -coated abrasives cloth backing narrow belts- used for putty, ground coat, varnish, paint grinding- type PE 432X -coated abrasives cloth backing narrow belts- used for putty, varnish grinding (wet medium)- type PCn 622X rubber, plastics polishing   Coated abrasives narrow belts- used for rubber, plastics polishing operations : -coated abrasives cloth backing narrow belts- used for rubber, plastics polishing - type PEz 522X -coated abrasives cloth backing narrow belts- used for rubber, plastics polishing - type PE 522X -coated abrasives cloth backing narrow belts- used for rubber, plastics polishing - type PE 432X -coated abrasives cloth backing narrow belts- used for rubber, plastics polishing - type PE 433X -coated abrasives cloth backing narrow belts- used for rubber, plastics polishing - type PCn 512X -coated abrasives cloth backing narrow belts- used for rubber, plastics polishing - type PCn 622X rubber, plastics grinding   Coated abrasives narrow belts- used for rubber, plastics grinding operations: -coated abrasives cloth backing narrow belts- used for rubber, platics grinding - type PEz 522X -coated abrasives cloth backing narrow belts- used for rubber, platics grinding - type PE 522X -coated abrasives cloth backing narrow belts- used for rubber, plastics grinding - type PE 432X -coated abrasives cloth backing narrow belts- used for rubber, plastics grinding - type PE 433X -coated abrasives cloth backing narrow belts- used for rubber, plastics grinding - type PCn 512X -coated abrasives cloth backing narrow belts- used for rubber, plastics grinding - type PCn 622X glass, ceramics, porcelain, rocks grinding   Coated abrasives narrow belts- used for glass, ceramics, porcelain, rocks grinding operations : -coated abrasives cloth backing narrow belts- used for rocks, ceramics, porcelain window glass grinding - type PCn 512X -coated abrasives cloth backing narrow belts- used for ceramics, porcelain, rocks, window glass, housekeeping glass - type PCn 622X

	3. Rolls:
product code >>>

wood calibration   Coated abrasives rolls- used for wood calibration operations: -coated abrasives paper backing rolls- used for wood calibration (all forest species)- type HEn 425E -coated abrasives paper backing rolls- used for wood calibration (resinous or soft wood)- type HEn 425ER -coated abrasives cloth backing rolls- used for wood calibration (all forest species)- type PEs 861X -coated abrasives cloth backing rolls- used for wood calibration (all forest species) parquet, panel- type PCn 512X -coated abrasives paper / cloth combination backing rolls- used for wood calibration (all forest species) - type CCn 432 -coated abrasives paper / cloth combination backing rolls- used for wood calibration (all forest species) pieces with great clogging power- type CCn 432R wood grinding   Coated abrasives rolls- used for wood grinding rolls: -coated abrasives paper backing rolls-used for wood grinding (all forest species)- typeHEn 425E -coated abrasives paper backing rolls- used for wood grinding (resinous or soft wood)- type HEn 425ER -coated abrasives cloth backing rolls- used for wood grinding - type PE 840X -coated abrasives cloth backing rolls- used for wood grinding (complex shape pieces)- type PEs 861J -coated abrasives cloth backing rolls- used for wood grinding (plane or curved pieces)- type PEs 861K -coated abrasives cloth backing rolls- used for wood grinding (all forest species)- type PEs 861X -coated abrasives cloth backing rolls- used gor woof grinding (all forest species), parquet, panels- type PCn 512X -coated abrasives paper / cloth combination backing rolls-used for wood grinding (all forest species) - type CCn 432 wood finishing   Coated abrasives rolls- used for wood finishing operations: -coated abrasives paper backing rolls- used for wood finishing (all forest species)- type HEn 425E -coated abrasives paper backing rolls- used for wood finishing (resinous or soft wood)- type HEn 425ER -coated abrasives cloth backing rolls- used for wood finishing ( complex shape pieces)- type PEs 861J -coated abrasives cloth backing rolls- used for wood finishing (all forest species)- type PEs 861K -coated abrasives cloth backing rolls-used for wood finishing (all forest species)- type PEs 861X metal grinding   Coated abrasives rolls- used for metal grinding operations: -coated abrasives paper backing rolls- used for metal grinding- type HEn 425E -coated abrasives cloth backing rolls- used for ferrous and non-ferrous metal grinding- type PE 840X -coated abrasives cloth backing rolls- used for ferrous and non-ferrous metal grinding- type PEs 861J -coated abrasives cloth backing rolls- used for ferrous and non-ferrous metal grinding- tip PEs 861K metal finishing   Coated abrasives rolls- used for metal finishing operations: -coated abrasives paper backing rolls- used for metallographic surfaces finishing- type HEn 425E -coated abrasives cloth backing rolls- used for ferrous and non-ferrous metal finishing- type PEs 861J putty, groud coat, varnish, paint grinding   Coated abrasives rolls- used for putty, groud coat, varnish, paint grinding operations: -coated abrasives paper backing rolls- used for putty, groud coat, varnish, paint grinding- type HEn 425E -coated abrasives paper backing rolls- used for putty, ground coat, varnish, paint grinding- type HCn 805C -coated abrasives cloth backing rolls- used for putty, ground coat, varnish, paint grinding ( curved pieces)- type PEs 861J -coated abrasives cloth backing rolls- used for putty, ground coat grinding (plane or curved pieces)- type PEs 861K putty, ground coat, varnish, paint finishing   Coated abrasives rools- used for putty, ground coat, varnish, paint finishing operations: -coated abrasives paper backing rolls- used for putty, ground coat, varnish, paint finishing- type HEn 425E -coated abrasives paper backing rolls- used for putty, ground coat, varnish, paint finishing- type HCn 805C -coated abrasives cloth backing rolls- used for putty, ground coat, varnish, paint finishing (curved pieces)- type PEs 861J eather grinding   Coated abrasives rolls- used for leather grinding operations: -coated abrasives paper backing rolls- used for leather grinding - type HEn 425E leather finishing   Coated abrasives rolls- used for leather finishing operations: -coated abrasives paper backing rolls- used for leather finishing - type HEn 425E rubber, plastics grinding operations   Coated abrasives rolls- used for rubber, plastics grinding operations: -coated abrasives cloth backing rolls- used for rubber, plastics grinding - type PEs 861J -coated abrasives cloth backing rolls- used for rubber, plastics grinding - type PEs 861K -coated abrasives cloth backing rolls- used for rubber, plastics grinding - type PEs 861X -coated abrasives cloth backing rolls- used for rubber, plastics grinding - type PCn 512X plastic finishing   Coated abrasives rolls- used for rubber, plastic finishing operations: -Coated abrasives cloth backing rolls- used for rubber, plastics finishing - type PEs 861J glass, ceramics, porcelain, rocks grinding   Coated abrasives rolls- used for glass, ceramics, porcelain, rocks grinding operations: -coated abrasives cloth backing rolls- used for rocks, ceramics, porcelain, window glass grinding - type PCn 512X -coated abrasives cloth backing rolls- used for ceramics, porcelain, rocks, window glass, housekeeping glass grinding - type PCn 622X

	4. SHEETS:
product code >>>

wood grinding   Coated abrasives sheets- used for wood grinding operations: -coated abrasives paper backing sheets- used for wood grinding (all forest species)- type HEn 425E -coated abrasives paper backing sheets- used for wood grinding (resinous or soft wood)- type HEn 425ER -coated barasives cloth backing sheets- used for wood grinding - type PE 840X -coated abrasives cloth backing sheets- used for wood grinding ( complex shape pieces)- type PEs 861J -coated abrasives cloth backing sheets- used for wood grinding (plane or curved pieces)- type PEs 861K -coated abrasives cloth backing sheets- used for wood grinding (all forest species)- type PEs 861X -coated abrasives cloth backing sheets- used for wood (all forest species), parquet, panels grinding - type PCn 512X -coated abrasives paper / cloth combination backing sheets- used for parquet grinding ; beech, oak parquet - type CCn 432 -coated abrasives paper / cloth combination backing sheets- used for parquet grinding, great clogging conditions- type CCn 432 R wood finishing   Coated abrasives sheets- used for wood finishing operations: -coated abrasives paper backing sheets- used for wood finishing (all forest species)- type HEn 425E -coated abrasives paper backing sheets- used for wood finishing (resinous or soft wood)- type HEn 425ER -coated abrasives cloth backing sheets- used wood finishing (complex shape pices)- type PEs 861J -coated abrasives cloth backing sheets- used for wood finishing (all forest species)- type PEs 861K -coated abrasives cloth backing sheets- used for wood finishing (all forest species)- type PEs 861X -coated abrasives unwoven backing (abratex) sheets- used for wood finishing (complex shapes)- type AE 630 -coated abrasives unwoven backing (abratex) sheets- used for wood finishing (complex shapes)- type AEn 630 metal grinding   Coated abrasives sheets- used for metal grinding operations: -coated abrasives paper backing sheets- used for metallographic surface grinding- type HEn 425E -coated abrasives paper backing sheets- used for metallographic surface grinding - type HCn 605C -coated abrasives cloth backing sheets- used for ferrous and non-ferrous metal grinding- type PE 432X -coated abrasives cloth backing sheets- used for ferrous and non-ferrous metal grinding- type PE 430X -coated abrasives cloth backing sheets- used for frrous and non-ferrous metal grinding- type PE 860X -coated abrasives cloth backing sheets- used for metal grinding (curved pieces) - type PEs 861J -coated abrasives cloth backing sheets- used for ferrous and non-ferrous metal grinding- type PEs 861K metal finishing   Coated abrasives sheets- used for metal finishing operations: -coated abrasives paper backing sheets- used for metallographic surface finishing- type HEn 425E -coated abrasives paper backing sheets- used for metallographic surface finishing - type HCn 605A -coated abrasives cloth backing sheets- used for frrous and non-ferrous metal finishing- type PE 432X -coated abrasives cloth backing sheets- used for ferrous and non-ferrous metal finishing- type PE 430X -coated abrasives cloth backing sheets- used for metal finishing (curved pieces) - type PEs 861J -coated abrasives unwoven backing (abratex) sheets- used for metallical surfaces finishing and fine finishing- type AE 630 -coated abrasives unwoven backing (abratex) sheets- used for metallical surfaces finishing and fine finishing- type AEn 630 putty, ground coat, varnish, paint grinding   Coated abrasives sheets- used for putty, ground coat, varnish, paint grinding operations: -coated abrasives paper backing sheets- used for putty, ground coat, varnish, paint grinding- type HEn 425E -coated abrasives paper backing sheets- used for putty, ground coat, varnish, paint grinding- type HCn 605C -coated abrasives paper backing sheets- used for putty, ground coat, varnish, paint grinding- type HCn 605A -coated abrasives cloth backing sheets- used for putty, ground coat, varnish, paint grinding - type PE 432X -coated abrasives cloth backing sheets- used for putty, ground coat, varnish, paint grinding (curved pieces)- type PEs 861J -foi de abrazivi pe suport panza- smirghel pe panza- pentru slefuire chituri, grunduri (piese plane sau curbate)- type PEs 861K putty, ground coat, varnish, paint finishing   Coated abrasives sheets- used for putty, ground coat, varnish, paint finishing operations: -coated abrasives paper backing sheets- used for putty, ground coat, varnish, paint finishing- type HCn 605A -coated abrasives cloth backing sheets- used for putty, ground coat, varnish, paint finishing - type PE 432X -coated abrasives cloth backing sheets- used for putty, ground coat, varnish, paint finishing (curved pieces)- type PEs 861J

	5. DISCS:
product code >>>

wood calibration   Coated abrasives discs- used for wood calibration operations: -coated abrasives paper backing discs- used for wood calibration (all forest species)- type HEn 425E -coated abrasives paper backing discs- used for wood calibration (resinous or soft wood)- typeHEn 425ER -coated abrasives cloth backing discs- used for wood (all forest species), parquet, panels calibration- type PCn 512X wood grinding   Coated abrasives discs- used for wood grinding operations: -coated abrasives paper backing discs- used for wood grinding (all forest species)- type HEn 425E -coated abrasives paper backing discs- used for wood grinding (resinous or sft wood)- type HEn 425ER -coated abrasives cloth backing discs- used for wood grinding (complex shape pieces)- type PEs 861J -coated abrasives cloth backing discs- used for wood grinding (plane or curved pieces)- type PEs 861K -coated abrasives cloth backing discs- used for wood grinding (all forest species)- type PEs 861X -coated abrasives cloth backing discs- used for wood (all forest species), parquet, panels grinding- type PCn 512X -coated abrasives paper / cloth combination backing discs- used for parquet grinding - type CCn 432 -coated abrasives paper / cloth combination backing discs- used for parquet grinding (great clogging conditions)- type CCn 432R wood finishing   Coated abrasives discs- used for wood finishing operations: -coated abrasives cloth backing discs- used for wood finishing (complex shape pieces)- type PEs 861J -coated barsives cloth backing discs- used for wood grinding (all forest species)- type PEs 861K metal deburring   Coated abrasives discs- used for metal deburring operations: -coated abrasives cloth backing discs- used for metal deburring - type PE 522X metal polishing   Coated abrasives discs- used for metal polishing operations: -coated abrasives cloth backing discs- used for metal polishing - type PE 522X -coated abrasives cloth backing discs- used for ferrous and non-ferous metal polishing - type PE 433X metal grinding   Coated abrasives discs- used for metal grinding operations: -coated abrasives paper backing discs- used for metallographic surface grinding - type HEn 425E -coated abrasives paper backing discs- used for metallographic surface grinding- type HCn 605C -coated abrasives cloth backing discs- used for ferrous and non-ferrous metal grinding- type PE 432X -coated abrasives cloth backing discs- used for frrous snd non-ferrous metal grinding- type PEs 861K -coated abrasives cloth backing discs- used for ferrous and non-ferrous metal grinding- typePEs 861X metal finishing   Coated abrasives discs- used for metal finishing operations: -coated abrasives paper backing discs- used for metallographic surface finishing - type HEn 425E -coated abrasives paper backing discs- used for metallographic surface finishing- type HCn 605A -coated abrasives cloth backing discs- used for ferrous and non-ferrous metal finishing- type PE 432X -coated abrasives cloth backing discs- used for ferrous and non- ferrous metal finishing- type PEs 861K putty, ground coat, varnish, paint grinding   Coated abrasives discs- used for putty, ground coat, varnish, paint grinding operations: -coated abrasives paper backing discs- used for putty, ground coat, varnish, paint grinding- type HEn 425E -coated abrasives paper backing discs- used for putty (automotive), ground coat, varnish, paint grinding ( wet medium)- type HCn 605C -coated abrasives cloth backing discs- used for putty, ground coat, varnish, paint grinding - type PE 432X -coated abrasives cloth backing discs- used for putty, ground coat (wood surfaces) grinding - type PEs 861K -coated abrasives cloth backing discs- used for putty, ground coat grinding - type PEs 861X putty, ground coat, varnish, paint finishing   Coated abrasives discs- used for putty, ground coat, varnish, paint finishing operations: -coated abrasives paper backing discs- used for putty, ground coat, varnish, paint finishing ( wet medium)- type HCn 605A -coated abrasives cloth backing discs- used for putty, ground coat, varnish, paint finishing - type PE 432X -coated abrasives cloth backing discs- used for putty, ground coat ( wood surfaces)- type PEs 861K glass, ceramics, porcelain, rocks grinding   Coated abrasives discs- used for glass, ceramics, porcelain, rocks grinding operations: -coated abrasives cloth backing discs- used for rocks, ceramics, porcelain, window glass grinding- type PCn 512X -coated abrasives cloth backing discs- used for ceramics, porcelain, rocks, windoe glass, housekeeping glass grinding - type PCn 622X -coated abrasives paper / cloth combinations backing discs- used for ceramics, porcelain grinding (dry medium) - type CCn 432.

	6. FLAP WHEELS:
product code >>>

FLAP WHEELS SHAFT MOUNTED   -flap wheels shaft mounted - used for metal polishing, grinding, finishing operations - shape LP0 -flap wheels shaft mounted- used for wood grinding, finishing operations - shape LE0 FLAP WHEELS WITH FLANGES   -flap wheels with flanges- used for metal polishing, grinding, finishing operations - shape LP1 -flap wheels with flanges- used for metal polishing, grinding, finishing operations - shape LR1 -flap wheels with flanges- used for metal polishing, grinding, finishing operations- shape LP2 -flap wheels with flanges used for metal polishing, grinding, finishing operations - shape LR2 -flap wheels with flanges- used for metal polishing, grinding, finishing operations- shape LP3 -flap wheels with flanges- used for metal polishing, grinding, finishing operations - shape LP4 -flap wheels with flanges- used for metal polishing, grinding, finishing operations - shape LR4 -flap wheels with flanges- used for metal polishing, grinding, finishing operations - shape LS4 -flap wheels with flanges- used for wood grinding, finishing operations - shape LE4 FLAP DISCS   -flap discs in front straight- used for stainless steel polishing, welding trace processing - shape LFD -flap discs in front slanted- used for stainless steel polishing , welding trace processing - shape LFI